Datasheet4U Logo Datasheet4U.com

PCA9624PW - LED driver

Download the PCA9624PW datasheet PDF. This datasheet also covers the PCA9624 variant, as both devices belong to the same led driver family and are provided as variant models within a single manufacturer datasheet.

General Description

The PCA9624 is an I2C-bus controlled 8-bit LED driver optimized for voltage switch dimming and blinking 100 mA Red/Green/Blue/Amber (RGBA) LEDs.

Key Features

  • 8 LED drivers. Each output programmable at:.
  • Off.
  • On.
  • Programmable LED brightness.
  • Programmable group dimming/blinking mixed with individual LED brightness.
  • 1 MHz Fast-mode Plus compatible I2C-bus interface with 30 mA high drive capability on SDA output for driving high capacitive buses.
  • 256-step (8-bit) linear programmable brightness per LED output varying from fully off (default) to maximum brightness using a 97 kHz PWM signal.
  • 256-step group brightness.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (PCA9624_NXPSemiconductors.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
PCA9625D 16-bit Fm I2C-bus 100 mA 24V LED driver NXP
PCA9626 LED Driver NXP
PCA9600 Dual Bidirectional Bus Buffer NXP
PCA9601 Dual bidirectional bus buffer NXP
PCA9615 Plus differential I2C-bus buffer NXP

Other Datasheets by NXP Semiconductors

Part Number Description
PCA9624 LED driver
PCA9620 Universal LCD driver
PCA9620H Universal LCD driver
PCA9621 65 mA 8-bit 2-wire bus output port
PCA9622 LED driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PCA9624 8-bit Fm+ I2C-bus 100 mA 40 V LED driver Rev. 4.1 — 18 January 2016 Product data sheet 1. General description The PCA9624 is an I2C-bus controlled 8-bit LED driver optimized for voltage switch dimming and blinking 100 mA Red/Green/Blue/Amber (RGBA) LEDs. Each LED output has its own 8-bit resolution (256 steps) fixed frequency individual PWM controller that operates at 97 kHz with a duty cycle that is adjustable from 0 % to 99.6 % to allow the LED to be set to a specific brightness value. An additional 8-bit resolution (256 steps) group PWM controller has both a fixed frequency of 190 Hz and an adjustable frequency between 24 Hz to once every 10.73 seconds with a duty cycle that is adjustable from 0 % to 99.6 % that is used to either dim or blink all LEDs with the same value.