Datasheet4U Logo Datasheet4U.com

TDA8035HN Datasheet Smart Card Interface

Manufacturer: NXP Semiconductors

Overview: TDA8035HN Smart card interface Rev. 1.0 — 19 April 2011 Product data sheet 1.

General Description

The TDA8035 is the cost efficient successor of the well established integrated contact smart card reader IC TDA8024.

It offers a high level of security for the card performing current limitation, short circuit detection, ESD protection as well as supply supervision.

Operating in 3 V supply domain, the current consumption during the standby mode of the contact reader is very low and is therefore the ideal ponent for a power efficient contact reader.

Key Features

  • 2.1 Protection of the contact smart card.
  • Thermal and short-circuit protections on all card contacts.
  • Vcc regulation: ‹ 5 V, 3 V, 1.8 V ± 5 % on 2 × 220 nF multilayer ceramic capacitors with low ESR ‹ current spikes of 40 nA/s (Vcc = 5 V and 3 V) or 15 nA/s (Vcc = 1.8 V) up to 20 MHz, with controlled rise and fall times, filtered overload detection approximately 120 mA.
  • Automatic activation and deactivation sequences initiated by software or by hardware in the event of.

Similar Datasheet

Brand Logo Part Number Description Manufacturer
NXP Logo TDA8035 High integrated and low power smart card interface NXP

More Datasheets from NXP Semiconductors

Part Number Description
TDA8025 IC card interface
TDA8295 Digital global standard low IF demodulator
TDA8296 Digital global standard low IF demodulator
TDA8302 SMALL SIGNAL COMBINATION IC
TDA8566 stereo BTL car radio power amplifier
TDA8595 I2C-bus controlled 4 x 45 W power amplifer
TDA8777 Triple 10-bit video DAC up to 330 MHz sample frequency
TDA8922B 2 X 50 W class-D power amplifier
TDA8925 Power stage 2 x 15 to 25Wclass-D audio amplifier
TDA8928J Power stage 2 x 10 or 1 x 20 W class-D audio amplifie

TDA8035HN Distributor