TJA1083 Overview
The TJA1083 FlexRay node transceiver is pliant with the FlexRay Electrical Physical Layer specification V3.0.1 (see Ref. In order to meet JASPAR the equirements, it implements the ‘Increased voltage amplitude transmitter’ functional class. It is primarily intended for munication systems operating at between 2.5 Mbit/s and 10 Mbit/s, and provides an advanced interface between the protocol controller and the physical...
TJA1083 Key Features
- pliant with Electrical Physical Layer specification V3.0.1
- Meets JASPAR requirementsasdescribedinthe ‘Busdriverincreasedvoltage amplitudetransmitter ’functionalclass
- Automotive product qualification in accordance with AEC-Q100
- Data transfer rates from 2.5 Mbit/s to 10 Mbit/s
- Supports 60 ns minimum bit time at 400 mV differential input voltage
- Very low ElectroMagnetic Emission (EME) to support unshielded cable
- Differential receiver with high mon-mode range for excellent ElectroMagnetic Immunity (EMI)
- Auto I/O level adaptation to host controller supply voltage VIO
- Can be used in 14 V, 24 V and 48 V powered systems
- Instant transmitter shut-down interface (BGE pin)
TJA1083 Applications
- pliant with Electrical Physical Layer specification V3.0.1
- Meets JASPAR requirementsasdescribedinthe ‘Busdriverincreasedvoltage amplitudetransmitter ’functionalclass
- Automotive product qualification in accordance with AEC-Q100
- Data transfer rates from 2.5 Mbit/s to 10 Mbit/s
- Supports 60 ns minimum bit time at 400 mV differential input voltage
- Very low ElectroMagnetic Emission (EME) to support unshielded cable
- Differential receiver with high mon-mode range for excellent ElectroMagnetic Immunity (EMI)
- Auto I/O level adaptation to host controller supply voltage VIO
