Datasheet4U Logo Datasheet4U.com

17511 - H-Bridge Motor Driver

Datasheet Summary

Description

Charge pump bucket capacitor 2 (negative pole).

Charge pump bucket capacitor 1 (positive pole).

Features

  • 2.0 to 6.8 V continuous operation.
  • Output current 1.0 A(DC), 3.0 A (peak).
  • MOSFETs < 600 mΩ RDS(ON) @ 25 °C guaranteed.
  • 3.0 V/5.0 V TTL/CMOS compatible logic inputs.
  • PWM frequencies up to 200 kHz.
  • Undervoltage shutdown.
  • Low power consumption.
  • Integrated charge pump.
  • Shoot-through current protection.
  • External MOSFET control circuit Document Number: MPC17511 Rev. 3.0, 10/2013 17511 H-BRIDGE MOTOR DRIVER IC.

📥 Download Datasheet

Datasheet preview – 17511

Datasheet Details

Part number 17511
Manufacturer NXP
File Size 378.89 KB
Description H-Bridge Motor Driver
Datasheet download datasheet 17511 Datasheet
Additional preview pages of the 17511 datasheet.

📁 Similar Datasheet

  • 17511A - H-Bridge Motor Driver (Freescale Semiconductor)
  • 17512LJC - XC17512LJC (Xilinx)
  • 17517 - Dual Motor Driver (Freescale Semiconductor)
  • 1751A - 1550nm DWDM DFB Laser Module (EMCORE)
  • 1750-XC6DT2 - DIESEL ENGINE-GENERATOR SET (MTU Onsite Energy)
  • 17533 - Dual H-Bridge Motor Driver (Freescale Semiconductor)
  • 1754C - C-Band DWDM DFB Laser Module (EMCORE)
  • 17550 - Quad H-Bridge Micromotor Driver (Freescale Semiconductor)
  • 175BGQ030 - SCHOTTKY RECTIFIER (International Rectifier)
  • 175BGQ030J - SCHOTTKY RECTIFIER (International Rectifier)
Other Datasheets by NXP
  • 17510 - 1.2A 15V H-Bridge motor driver
  • 17529 - dual H-Bridge motor driver
  • 17531A - dual H-Bridge motor driver

Full PDF Text Transcription

Click to expand full text
Freescale Semiconductor Technical Data 1.0 A 6.8 V H-Bridge Motor Driver IC The 17511 is a monolithic H-Bridge designed to be used in portable electronic applications to control small DC motors or bipolar step motors. End applications include head positioners (CDROM or disk drive), camera focus motors, and camera shutter solenoids. The 17511 can operate efficiently with supply voltages as low as 2.0 V to as high as 6.8 V. Its low RDS(ON) H-Bridge output MOSFETs (0.46 Ω typical) can provide continuos motor drive currents of 1.0 A and handle peak currents up to 3.0 A. It is easily interfaced to low-cost MCUs via parallel 3.0 V or 5.0 V compatible logic. The device can be pulse width modulated (PWMed) at up to 200 kHz.
Published: |