Datasheet4U Logo Datasheet4U.com

33812 - Multifunctional Ignition and Injector Driver

Datasheet Summary

Features

  • Designed to operate over the range of ~4.7 V  VPWR  36 V.
  • Fuel injector driver - Current Limit - 4.0 A typical.
  • Ignition pre-driver can drive IGBT or Darlington bipolar junction.

📥 Download Datasheet

Datasheet preview – 33812

Datasheet Details

Part number 33812
Manufacturer NXP
File Size 349.89 KB
Description Multifunctional Ignition and Injector Driver
Datasheet download datasheet 33812 Datasheet
Additional preview pages of the 33812 datasheet.

📁 Similar Datasheet

  • 33812 - Multifunctional Ignition and Injector Driver (Freescale Semiconductor)
  • 33810 - Automotive Engine Controller (Freescale Semiconductor)
  • 33811 - Solenoid Monitor (Freescale Semiconductor)
  • 33813 - One Cylinder Small Engine Controller (Freescale Semiconductor)
  • 33814 - Two cylinder small engine controller (Freescale Semiconductor)
  • 33800 - Engine Control Integrated Circuit (Freescale Semiconductor)
  • 3382G - Rotary Position Sensor (Bourns)
  • 3382H - Rotary Position Sensor (Bourns)
  • 3386 - Trimming Potentiometer (Bourns)
  • 3386B - Trimming Potentiometer (Bourns)
Other Datasheets by NXP
  • 33814 - Two cylinder small engine controller
  • 33816 - SD6 programmable solenoid controller
  • 33879 - Configurable octal serial switch
  • 33879A - Configurable octal serial switch
  • 33887 - 5.0A H-Bridge with Load Current Feedback
  • 33889 - System basis chip

Full PDF Text Transcription

Click to expand full text
NXP Semiconductors Data sheet: Technical Data Multifunctional Ignition and Injector Driver Document Number: MC33812 Rev. 6.0, 4/2016 33812 The 33812 is an engine control analog power IC intended for motorcycle and other single/dual cylinder small engine control applications. The IC consists of three integrated low-side drivers, one pre-driver, a +5.0 V, voltage pre-regulator, an MCU watchdog circuit, an ISO 9141 K-Line interface, and a parallel interface for MCU communication. The three low-side drivers are provided for driving a fuel injector, a lamp or LED, and a relay or other load. The pre-driver is intended to drive either an Insulated Gate Bipolar Transistor (IGBT) or a bipolar Darlington transistor to control an ignition coil. This device is powered by SMARTMOS technology.
Published: |