Datasheet4U Logo Datasheet4U.com

33910 - LIN transceiver

General Description

of each pin can be found in the Functional pin description.

Table 2.

This pin is the receiver output of the LIN interface which reports the state of the bus voltage to the MCU interface.

Key Features

  • The device provides full SPI readable diagnostics and a selectable timing watchdog for detecting errant operation. The LIN Protocol Specification 2.0 and 2.1 compliant LIN transceiver has waveshaping circuitry which can be disabled for higher data rates. Two 50 mA/60 mA high-side switches with optional pulse-width modulated (PWM) are implemented to drive small loads. One high voltage input is available for use in contact monitoring, or as external wake-up input. This input can be used as high v.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
3390 Optoelectronic Switch - Twilight Sensor Allegro MicroSystems
33901 High-speed CAN Transceiver Freescale Semiconductor
33926 5.0A Throttle Control H-Bridge Freescale Semiconductor
33931 5.0A Throttle Control H-bridge Freescale Semiconductor
33932 5.0A Throttle Control H-Bridge Freescale Semiconductor

Other Datasheets by NXP Semiconductors

Part Number Description
33911 LIN transceiver
33912 LIN transceiver
33903 SBC Gen2
33904 SBC Gen2
33905 SBC Gen2

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NXP Semiconductors Technical Data MC33910G5AC/MC3433910G5AC Document Number: MC33910 Rev. 9.0, 7/2016 LIN system basis chip with high-side drivers 33910 The 33910G5/BAC is a SMARTMOS Serial Peripheral Interface (SPI) controlled System Basis Chip (SBC), combining many frequently used functions in an MCU based system, plus a Local Interconnect Network (LIN) transceiver. The 33910 has a 5.0 V, 50 mA/60 mA low dropout regulator with full protection and reporting features. The device provides full SPI readable diagnostics and a selectable timing watchdog for detecting errant operation. The LIN Protocol Specification 2.0 and 2.1 compliant LIN transceiver has waveshaping circuitry which can be disabled for higher data rates.