Datasheet4U Logo Datasheet4U.com

74AVC1T45 - Dual-supply voltage level translator/transceiver

General Description

The 74AVC1T45 is a single bit, dual supply transceiver with 3-state output that enables bidirectional level translation.

Key Features

  • two 1-bit input-output ports (A and B), a direction control input (DIR) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 0.8 V and 3.6 V making the device suitable for translating between any of the low voltage nodes (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V). Pins A and DIR are referenced to VCC(A) and pin B is referenced to VCC(B). A HIGH on DIR allows transmission from A to B and a LOW on DIR allows transmission from B to A. The device.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74AVC1T45 SINGLE BIT DUAL POWER SUPPLY TRANSLATING TRANSCEIVER Diodes
74AVC1T45 Dual-supply voltage level translator/transceiver nexperia
74AVC1T45-Q100 Dual-supply voltage level translator/transceiver nexperia
74AVC1T1004 1-to-4 fan-out buffer nexperia
74AVC1T1022 1-to-4 fan-out buffer nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74AVC16244 16-bit buffer/line driver
74AVC16245 16-bit transceiver
74AVC16373 16-bit D-type transparent latch
74AVC16374 16-bit edge triggered D-type flip-flop
74AVC16834 18-bit registered driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74AVC1T45 Dual-supply voltage level translator/transceiver; 3-state Rev. 6 — 20 April 2016 Product data sheet 1. General description The 74AVC1T45 is a single bit, dual supply transceiver with 3-state output that enables bidirectional level translation. It features two 1-bit input-output ports (A and B), a direction control input (DIR) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 0.8 V and 3.6 V making the device suitable for translating between any of the low voltage nodes (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V). Pins A and DIR are referenced to VCC(A) and pin B is referenced to VCC(B). A HIGH on DIR allows transmission from A to B and a LOW on DIR allows transmission from B to A.