Datasheet4U Logo Datasheet4U.com

74HC154 - 4-to-16 line decoder/demultiplexer

General Description

The 74HC154; 74HCT154 is a 4-to-16 line decoder/demultiplexer.

It decodes four binary weighted address inputs (A0 to A3) to sixteen mutually exclusive outputs (Y0 to Y15).

Key Features

  • 16-line demultiplexing capability.
  • Decodes 4 binary-coded inputs into 16 mutually-exclusive outputs.
  • Complies with JEDEC standard no. 7A.
  • Input levels:.
  • For 74HC154: CMOS level.
  • For 74HCT154: TTL level.
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V.
  • Multiple package options.
  • Specified from 40 C to +85 C and 40 C to +125 C 3. Ordering information Table 1. Ordering information Type number Package T.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC154 4-to-16 line decoder/demultiplexer nexperia
74HC154D 4-to-16 line decoder/demultiplexer nexperia
74HC151 8-Line To 1-Line Data Selectors/Multiplexers Texas Instruments
74HC151 8-input multiplexer Philips
74HC151 8-input multiplexer nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74HC151-Q100 8-input multiplexer
74HC151D-Q100 8-input multiplexer
74HC151PW-Q100 8-input multiplexer
74HC153 Dual 4-input multiplexer
74HC157 Quad 2-input multiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC154; 74HCT154 4-to-16 line decoder/demultiplexer Rev. 7 — 29 February 2016 Product data sheet 1. General description The 74HC154; 74HCT154 is a 4-to-16 line decoder/demultiplexer. It decodes four binary weighted address inputs (A0 to A3) to sixteen mutually exclusive outputs (Y0 to Y15). The device features two input enable (E0 and E1) inputs. A HIGH on either of the input enables forces the outputs HIGH. The device can be used as a 1-to-16 demultiplexer by using one of the enable inputs as the multiplexed data input. When the other enable input is LOW the addressed output will follow the state of the applied data. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2.