Datasheet4U Logo Datasheet4U.com

74HC377 - Octal D-type flip-flop

General Description

The 74HC377; 74HCT377 is an octal positive-edge triggered D-type flip-flop.

Key Features

  • Common clock and master reset.
  • Eight positive edge-triggered D-type flip-flops.
  • Complies with JEDEC standard no. 7A.
  • Input levels:.
  • For 74HC377: CMOS level.
  • For 74HCT377: TTL level.
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V.
  • Multiple package options.
  • Specified from 40 C to +85 C and from 40 C to +125 C 3. Ordering information Table 1. Ordering information Type number Package Temperature rang.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC377 Octal D-type flip-flop nexperia
74HC377 Octal D-Type Flip-Flop Texas Instruments
74HC377-Q100 Octal D-type flip-flop nexperia
74HC377D Octal D-type flip-flop nexperia
74HC373 Octal Transparent D-Type Latches Texas Instruments

Other Datasheets by NXP Semiconductors

Part Number Description
74HC373 Octal D-type transparent latch
74HC30 8-input NAND gate
74HC30-Q100 8-input NAND gate
74HC32 Quad 2-input OR gate
74HC3G04 Inverter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC377; 74HCT377 Octal D-type flip-flop with data enable; positive-edge trigger Rev. 3 — 25 September 2013 Product data sheet 1. General description The 74HC377; 74HCT377 is an octal positive-edge triggered D-type flip-flop. The device features clock (CP) and data enable (E) inputs. When E is LOW, the outputs Qn assume the state of their corresponding Dn inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. Input E must be stable one set-up time prior to the LOW-to-HIGH transition for predictable operation. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2.