Datasheet4U Logo Datasheet4U.com

74HC4051 - 8-channel analog multiplexer/demultiplexer

General Description

The 74HC4051; 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications.

Key Features

  • Wide analog input voltage range from 5 V to +5 V.
  • Complies with JEDEC standard no. 7A.
  • Low ON resistance:.
  • 80  (typical) at VCC  VEE = 4.5 V.
  • 70  (typical) at VCC  VEE = 6.0 V.
  • 60  (typical) at VCC  VEE = 9.0 V.
  • Logic level translation: to enable 5 V logic to communicate with 5 V analog signals.
  • Typical ‘break before make’ built-in.
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM JESD22-C10.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC4051 8-channel analog multiplexer/demultiplexer nexperia
74HC4051-Q100 8-channel analog multiplexer/demultiplexer nexperia
74HC4051A Analog Multiplexers/Demultiplexers Motorola
74HC4051D 8-Channel Analog Multiplexer/Demultiplexer Toshiba
74HC4051D 8-channel analog multiplexer/demultiplexer nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74HC4051-Q100 8-channel analog multiplexer/demultiplexer
74HC4050 Hex non-inverting HIGH-to-LOW level shifter
74HC4052 Dual 4-channel analog multiplexer/demultiplexer
74HC4002 Dual 4-input NOR gate
74HC4002-Q100 Dual 4-input NOR gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC4051; 74HCT4051 8-channel analog multiplexer/demultiplexer Rev. 8 — 5 February 2016 Product data sheet 1. General description The 74HC4051; 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications. The switch features three digital select inputs (S0, S1 and S2), eight independent inputs/outputs (Yn), a common input/output (Z) and a digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits  Wide analog input voltage range from 5 V to +5 V  Complies with JEDEC standard no. 7A  Low ON resistance:  80  (typical) at VCC  VEE = 4.