Datasheet4U Logo Datasheet4U.com

74HC4052 - Dual 4-channel analog multiplexer/demultiplexer

General Description

The 74HC4052; 74HCT4052 is a dual single-pole quad-throw analog switch (2x SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications.

Key Features

  • Wide analog input voltage range from 5 V to +5 V.
  • Low ON resistance:.
  • 80  (typical) at VCC  VEE = 4.5 V.
  • 70  (typical) at VCC  VEE = 6.0 V.
  • 60  (typical) at VCC  VEE = 9.0 V.
  • Logic level translation: to enable 5 V logic to communicate with 5 V analog signals.
  • Typical ‘break before make’ built-in.
  • Complies with JEDEC standard no. 7A.
  • Input levels:.
  • For 74HC4052: CMOS level.
  • For 74HCT4052: TTL level.
  • ESD protection:.
  • HBM JES.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC4052 Dual 4-channel analog multiplexer/demultiplexer nexperia
74HC4052-Q100 Dual 4-channel analog multiplexer/demultiplexer nexperia
74HC4052D Dual 4-Channel Analog Multiplexer/Demultiplexer Toshiba
74HC4052D Dual 4-channel analog multiplexer/demultiplexer nexperia
74HC4052FT Dual 4-Channel Analog Multiplexer/Demultiplexer Toshiba

Other Datasheets by NXP Semiconductors

Part Number Description
74HC4050 Hex non-inverting HIGH-to-LOW level shifter
74HC4051 8-channel analog multiplexer/demultiplexer
74HC4051-Q100 8-channel analog multiplexer/demultiplexer
74HC4002 Dual 4-input NOR gate
74HC4002-Q100 Dual 4-input NOR gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer Rev. 11 — 10 February 2016 Product data sheet 1. General description The 74HC4052; 74HCT4052 is a dual single-pole quad-throw analog switch (2x SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0 and S1) are common to both switches. When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2.