Datasheet4U Logo Datasheet4U.com

74HC541 - Octal buffer/line driver

General Description

The 74HC541; 74HCT541 is an octal non-inverting buffer/line driver with 3-state outputs.

Key Features

  • Non-Inverting outputs.
  • Complies with JEDEC standard no. 7A.
  • Input levels:.
  • For 74HC541: CMOS level.
  • For 74HCT541: TTL level.
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V.
  • Multiple package options.
  • Specified from 40 C to +85 C and from 40 C to +125 C 3. Ordering information Table 1. Ordering information Type number Package Temperature range 74HC541N 40 C to +125 C 74HCT541N 74HC541D 40 C to.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC541 OCTAL BUS BUFFER STMicroelectronics
74HC541 Octal buffer/line driver nexperia
74HC541 Octal Buffers/Line Drivers Hitachi
74HC541 Inverting Octal 3-STATE Buffer Fairchild
74HC541-Q100 Octal buffer/line driver nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74HC573 Octal D-type transparent latch
74HC574 Octal D-type flip-flop
74HC595 8-bit serial-in serial or parallel-out shift register
74HC00 Quad 2-input NAND gate
74HC05 Hex inverter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC541; 74HTC541 Octal buffer/line driver; 3-state Rev. 3 — 15 April 2014 Product data sheet 1. General description The 74HC541; 74HCT541 is an octal non-inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits  Non-Inverting outputs  Complies with JEDEC standard no. 7A  Input levels:  For 74HC541: CMOS level  For 74HCT541: TTL level  ESD protection:  HBM JESD22-A114F exceeds 2000 V  MM JESD22-A115-A exceeds 200 V  Multiple package options  Specified from 40 C to +85 C and from 40 C to +125 C 3.