Datasheet4U Logo Datasheet4U.com

74HCT373 - Octal D-type transparent latch

Download the 74HCT373 datasheet PDF. This datasheet also covers the 74HC373 variant, as both devices belong to the same octal d-type transparent latch family and are provided as variant models within a single manufacturer datasheet.

General Description

The 74HC373; 74HCT373 is an octal D-type transparent latch with 3-state outputs.

Key Features

  • Input levels:.
  • For 74HC373: CMOS level.
  • For 74HCT373: TTL level.
  • 3-state non-inverting outputs for bu.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74HC373-NXP.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
74HCT373 Octal D-type transparent latch nexperia
74HCT373 OCTAL TRANSPARENT D-TYPE LATCHES Texas Instruments
74HCT373-Q100 Octal D-type transparent latch nexperia
74HCT373D Octal D-type transparent latch nexperia
74HCT373N Octal D-type transparent latch nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74HCT377 Octal D-type flip-flop
74HCT30 8-Input NAND Gate
74HCT30-Q100 8-input NAND gate
74HCT32 Quad 2-input OR gate
74HCT3G04 Inverter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC373; 74HCT373 Octal D-type transparent latch; 3-state Rev. 6 — 26 February 2016 Product data sheet 1. General description The 74HC373; 74HCT373 is an octal D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the latches. Inputs include clamp diodes.