Datasheet4U Logo Datasheet4U.com

74LV153 - Dual 4-input multiplexer

General Description

The 74LV153 is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC153 and 74HCT153.

The 74LV153 provides a dual 4-input multiplexer which selects 2 bits of data from up to four sources selected by common data select inputs (S0, S1).

Key Features

  • Wide operating voltage: 1.0 V to 3.6 V.
  • Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V.
  • Typical output ground bounce < 0.8 V at VCC = 3.3 V and Tamb = 25 C.
  • Typical HIGH-level output voltage (VOH) undershoot: > 2 V at VCC = 3.3 V and Tamb = 25 C.
  • Non-inverting outputs.
  • Separate enable input for each output.
  • Common select inputs.
  • Permits multiplexing from n lines to 1 line.
  • Enable line provided for cascading (n lines to 1 line).
  • E.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LV153 Dual 4-input multiplexer Philips
74LV154 4-to-16 line decoder/demultiplexer Philips
74LV157 Quad 2-input multiplexer Philips
74LV10 Triple 3-input NAND gate Philips
74LV107 Dual JK flip-flop Philips

Other Datasheets by NXP Semiconductors

Part Number Description
74LV138 3-to-8 line decoder/demultiplexer
74LV14 Hex inverting Schmitt trigger
74LV08 Quad 2-input AND gate
74LV244 Octal buffer/line driver
74LV4052 Dual 4-channel analog multiplexer/demultiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LV153 Dual 4-input multiplexer Rev. 5 — 12 December 2011 Product data sheet 1. General description The 74LV153 is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC153 and 74HCT153. The 74LV153 provides a dual 4-input multiplexer which selects 2 bits of data from up to four sources selected by common data select inputs (S0, S1). The two 4-input multiplexer circuits have individual active LOW output enable inputs (1E, 2E) which can be used to strobe the outputs independently. The outputs (1Y, 2Y) are forced LOW when the corresponding output enable inputs are HIGH. The 74LV153 is the logic implementation of a 2-pole, 4-position switch, where the position of the switch, is determined by the logic levels applied to S0 and S1.