Datasheet4U Logo Datasheet4U.com

74LV4052 - Dual 4-channel analog multiplexer/demultiplexer

General Description

The 74LV4052 is a low-voltage CMOS device and is pin and function compatible with the 74HC/HCT4052.

The 74LV4052 is a dual 4-channel analog multiplexer/demultiplexer with a common select logic.

Each multiplexer has four independent inputs/outputs (nY0 to nY3) and a common input/output (nZ).

Key Features

  • Optimized for low-voltage.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LV4052 Dual 4-channel analog multiplexer/demultiplexer nexperia
74LV4052-Q100 Dual 4-channel analog multiplexer/demultiplexer nexperia
74LV4052D Dual 4-channel analog multiplexer/demultiplexer nexperia
74LV4051 8-channel analog multiplexer/demultiplexer Philips
74LV4051 8-channel analog multiplexer/demultiplexer nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74LV4067 16-channel analog multiplexer/demultiplexer
74LV08 Quad 2-input AND gate
74LV138 3-to-8 line decoder/demultiplexer
74LV14 Hex inverting Schmitt trigger
74LV153 Dual 4-input multiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LV4052 Dual 4-channel analog multiplexer/demultiplexer Rev. 4 — 1 July 2013 Product data sheet 1. General description The 74LV4052 is a low-voltage CMOS device and is pin and function compatible with the 74HC/HCT4052. The 74LV4052 is a dual 4-channel analog multiplexer/demultiplexer with a common select logic. Each multiplexer has four independent inputs/outputs (nY0 to nY3) and a common input/output (nZ). The common channel select logics include two digital select inputs (S0 and S1) and an active LOW enable input (E). With E LOW, one of the four switches is selected (low impedance ON-state) by S0 and S1. With E HIGH, all switches are in the high impedance OFF-state, independent of S0 and S1. VCC and GND are the supply voltage pins for the digital control inputs (S0, S1 and E).