Datasheet4U Logo Datasheet4U.com

BGA2715 - MMIC wideband amplifier

General Description

Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal matching circuit in a 6-pin SOT363 SMD plastic package.

CAUTION This device is sensitive to electrostatic discharge (ESD).

Therefore care should be taken during transport and handling.

Key Features

  • s s s s s s s Internally matched to 50 Ω Wide frequency range (3.3 GHz at 3 dB bandwidth) Flat 22 dB gain (±1 dB up to 2.8 GHz).
  • 8 dBm output power at 1dB compression point Good linearity for low current (IP3out = 2 dBm) Low second harmonic,.
  • 30 dBc at PD =.
  • 40 dBm Unconditionally stable (K ≥ 2). 1.3.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BGA231N7 Silicon Germanium GNSS Low Noise Amplifier Infineon
BGA24 8-bit ECC NAND flash XTX
BGA2801 MMIC wideband amplifier NXP Semiconductors
BGA2850 MMIC wideband amplifier NXP Semiconductors
BGA2870 MMIC wideband amplifier NXP Semiconductors

Other Datasheets by NXP Semiconductors

Part Number Description
BGA2711 MMIC wideband amplifier
BGA2712 MMIC wideband amplifier
BGA2714 MMIC wideband amplifier
BGA2716 MMIC wideband amplifier
BGA2717 MMIC wideband amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
BGA2715 MMIC wideband amplifier Rev. 02 — 24 September 2004 Product data sheet 1. Product profile 1.1 General description Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal matching circuit in a 6-pin SOT363 SMD plastic package. CAUTION This device is sensitive to electrostatic discharge (ESD). Therefore care should be taken during transport and handling. MSC895 1.2 Features s s s s s s s Internally matched to 50 Ω Wide frequency range (3.3 GHz at 3 dB bandwidth) Flat 22 dB gain (±1 dB up to 2.8 GHz) −8 dBm output power at 1dB compression point Good linearity for low current (IP3out = 2 dBm) Low second harmonic, −30 dBc at PD = −40 dBm Unconditionally stable (K ≥ 2). 1.3 Applications s s s s LNB IF amplifiers Cable systems ISM General purpose. 1.