BT139X-500 Datasheet | NXP Semiconductors

Philips Semiconductors Product specification Triacs BT139X series GENERAL DESCRIPTION Glass passivated triacs in a full pack, plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating and static switching. QUICK REFERENCE DATA SYMBOL PARAMETER BT139XBT139XBT139XRepetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current MAX. MAX. MAX. UNIT 500 500F 500G 500 16 140 600 600F 600G 600 16 140 800 800F 800G 800 16 140 VDRM IT(RMS) ITSM PINNING - SOT186A PIN 1 2 3 DESCRIPTION main terminal 1 PIN CONFIGURATION case SYMBOL T2 main terminal 2 gate 1 2 3 T1 case isolated LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL VDRM IT(RMS) ITSM PARAMETER Repetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current I2t for fusing Repetitive rate of rise of on-state current after triggering full sine wave; Ths ≤ 38 ˚C full sine wave; Tj = 25 ˚C prior to surge t = 20 ms t = 16.7 ms t = 10 ms ITM = 20 A; IG = 0.2 A; d IG/dt = 0.2 A/µs T2+ G+ T2+ GT2- GT2- G+ CONDITIONS MIN. -40 -500 5001 MAX. -600 6001 16 140 150 98 50 50 50 10 2 5 5 0.5 150 125 -800 800 UNIT V A A A A2s A/µs A/µs A/µs A/µs A V W W ˚C ˚C I2t d IT/dt IGM VGM PGM PG(AV) Tstg Tj Peak gate current Peak gate voltage Peak gate power Average gate power Storage temperature Operating junction temperature over any 20 ms period 1 Although not remended, off-state voltages up to 800V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 15 A/µs. September 1997 1 Rev 1.200 Philips Semiconductors Product specification Triacs BT139X series ISOLATION LIMITING VALUE & CHARACTERISTIC Ths = 25 ˚C unless otherwise specified SYMBOL Visol PARAMETER...