BTA216X-500B Datasheet | NXP Semiconductors

DESCRIPTION Glass passivated high mutation triacs in a full pack, plastic envelope intended for use in circuits where high static and dynamic d V/dt and high d I/dt can occur. These devices will mutate the full rated rms current at the maximum rated junction temperature, without the aid of a snubber. BTA216X series B QUICK REFERENCE DATA SYMBOL VDRM IT(RMS) ITSM PARAMETER MAX. MAX. MAX. UNIT 600B 600 16 140 800B 800 16 140 V A A BTA216X- 500B Repetitive peak off-state 500 voltages RMS on-state current 16 Non-repetitive peak on-state 140 current PINNING - SOT186A PIN 1 2 3 DESCRIPTION main terminal 1 PIN CONFIGURATION case SYMBOL T2 main terminal 2 gate 1 2 3 T1 case isolated LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL VDRM IT(RMS) ITSM PARAMETER Repetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current full sine wave; Ths ≤ 38 ˚C full sine wave; Tj = 25 ˚C prior to surge t = 20 ms t = 16.7 ms t = 10 ms ITM = 20 A; IG = 0.2 A; d IG/dt = 0.2 A/µs CONDITIONS MIN. -500 5001 MAX. -600 6001 16 -800 800 UNIT V A I2t d IT/dt IGM VGM PGM PG(AV) Tstg Tj I2t for fusing Repetitive rate of rise of on-state current after triggering Peak gate current Peak gate voltage Peak gate power Average gate power Storage temperature Operating junction temperature - 140 150 98 100 2 5 5 0.5 150 125 A A A2s A/µs A V W W ˚C ˚C over any 20 ms period -40 - 1 Although not remended, off-state voltages up to 800V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 15 A/µs. October 1997 1 Rev 1.200 Philips Semiconductors Product specification Three quadrant triacs high mutation ISOLATION LIMITING VALUE & CHARACTERISTIC Ths = 25 ˚C unless otherwise specified SYMBOL Visol PARAMETER R.M.S. isolation voltage from all three terminals to external heatsink CONDITIONS f = 50-60 Hz; sinusoidal waveform; R.H. ≤ 65% ; clean and dustfree...