Datasheet4U Logo Datasheet4U.com

CBT16292 - 12-bit 1-of-2 multiplexer/demultiplexer

General Description

The CBT16292 is a 12-bit 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer.

The low ON resistance of the switch allows connections to be made with minimal propagation delay.

Key Features

  • I 6 Ω switch connection between two ports I TTL compatible input levels I Break-before-make feature I Internal 500 Ω pull-down resistors to ground I ESD protection: N HBM JESD22-A114E Class 2 exceeds 2000 V N MM JESD22-A115-A exceeds 200 V N CDM JESD22-C101C exceeds 1000 V I Latch-up performance exceeds 500 mA per JESD 78 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CBT16292 12-bit 1-of-2 multiplexer/demultiplexer Philips
CBT16209A 18-BIT FET BUS-EXCHANGE SWITCHES Texas Instruments
CBT16210 20-bit bus switch Philips
CBT16212 24-bit bus exchange switch with 12-bit output enables Integrated Circuit Systems
CBT16244 16-BIT FET BUS SWITCHES Texas Instruments

Other Datasheets by NXP Semiconductors

Part Number Description
CBT16211 OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
CBT16212 24-bit bus exchange switch
CBT3125 Quadruple FET bus switch
CBT3244 Octal bus switch with Quad Output Enables
CBT3245 Octal bus switch with output enable

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CBT16292 12-bit 1-of-2 multiplexer/demultiplexer Rev. 02 — 18 April 2008 Product data sheet 1. General description The CBT16292 is a 12-bit 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low ON resistance of the switch allows connections to be made with minimal propagation delay. When the select input (S) is LOW, port nA is connected to port nB1 and port nB2 is connected to GND via an internal pull-down resistor (500 Ω). When select input (S) is HIGH, port nA is connected to port nB2 and nB1 is connected to GND via an internal pull-down resistor (500 Ω). The CBT16292 is characterized for operation from –40 °C to +85 °C. 2.