NXP Semiconductors CBT6832
The CBT6820 provides twenty bits of high-speed TTL-compatible bus switching. The low on-state resistance of the switch allows bi-directional connections to be made while adding near-zero propagation delay. The device also precharges the B port to a user-selectable bias voltage (BIASV) to minimize live-insertion noise.| Part No. | CBT6832 |
|---|---|
| Datasheet | CBT6832 Download |
| Manufacturer |  NXP Semiconductors |
| Description | INTEGRATED CIRCUITS |
| Buy | Stock & Price |
FEATURES
● TTL compatible inputs and outputs● 5Ω switch connection between two port A and port B
● Thin shrink small outline (TSSOP)
● Undershoot protection included to prevent shoot through level changes PIN CONFIGURATION BIASV 1 1A1 2 1A2 3 1A3 4 1A4 5 1A5 6 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 1OE 2OE 1B1 1B2 1B3 1B4 1B5 GND 1B6 1B7 1B8 1B9 1B10 2B1 2B2 2B3 GND 2B4 2B5 2B6 2B7 2B8 2B9 2B10
● Bias voltage pre-charges the outputs to minimize signal distortion during live insertion
DESCRIPTION
The device is organized as two 10-bit switch with individual enable (OE) input. When OE is low, the switch is on and port A is connected to port B. When OE is high, the switch between port A and port B is open and the B port is precharged to BIASV through the equivalent of a 10-kΩ resistor. Special clamp circuitry and Schottky diode clamps to ground are used to prevent an under voltage on the A side (Vin < GND) from causing the B side precharge voltage to drop below the ‘‘1” state.
