Datasheet4U Logo Datasheet4U.com

FBL22040 - 3.3V BTL8-bit TTL to BTL transceiver

General Description

The FBL22040 is an 8-bit bidirectional BTL transceiver and is intended to provide the electrical interface to a high performance wired-OR bus.

The FBL22040 is an inverting transceiver.

The B-port drivers are Low-capacitance open collectors with controlled ramp and are designed to sink 100mA.

Key Features

  • Resistor version of FB2040.
  • 8-bit BTL transceivers.
  • Separate I/O on TTL A-port.
  • Inverting.
  • Drives heavily loaded backplanes with equivalent load impedances down to 10Ω.
  • Controlled output ramp and multiple GND pins minimize ground bounce.
  • High drive 100mA BTL open collector drivers on B-port.
  • Allows incident wave switching in heavily loaded backplane buses.
  • Reduced BTL voltage swing produces less noise and reduc.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS FBL22040 3.3V BTL8-bit TTL to BTL transceiver Product specification IC23 Data Handbook 1998 Dec 07 Philips Semiconductors Philips Semiconductors Product specification 3.3V BTL 8-bit TTL to BTL transceiver FBL22040 FEATURES • Resistor version of FB2040 • 8-bit BTL transceivers • Separate I/O on TTL A-port • Inverting • Drives heavily loaded backplanes with equivalent load impedances down to 10Ω.