NXP Semiconductors HCT4016
The 74HC/HCT4016 are high-speed Si-gate CMOS devices and are pin compatible with the “4016” of the QUICK REFERENCE DATA GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns 74HC/HCT4016 “4000B” series. They are specified in compliance with JEDEC standard no.| Part No. | HCT4016 |
|---|---|
| Datasheet | HCT4016 Download |
| Manufacturer |  NXP Semiconductors |
| Description | Quad bilateral switches |
| Buy | Stock & Price |
FEATURES
● Low “ON” resistance: 160 Ω (typ.) at VCC = 4.5 V 120 Ω (typ.) at VCC = 6.0 V 80 Ω (typ.) at VCC = 9.0 V● Individual switch controls
● Typical “break before make” built in
● Output capability: non-standard
● ICC category: SSI
GENERAL DESCRIPTION
7A. The 74HC/HCT4016 have four independent analog switches (transmission gates). Each switch has two input/output terminals (Yn, Zn) and an active HIGH enable input (En). When En is connected to VCC, a low bidirectional path between Yn and Zn is established (ON condition). When En is connected to ground (GND), the switch is disabled and a high impedance between Yn and Zn is established (OFF condition). Current through a switch will not cause additional VCC current provided the voltage at the terminals of the switch is maintained within the supply voltage range; VCC >> (VY, VZ) >> GND. Inputs Yn and Zn are electrically equivalent terminals. TYPICAL SYMBOL tPZH/ tPZL tPHZ/ tPLZ CI CPD CS Notes 1. CPD is used to determine the dynamic po...
