Datasheet4U Logo Datasheet4U.com

HEF4543B - BCD to 7-segment latch/decoder/driver

General Description

The HEF4543B is a BCD to 7-segment latch/decoder/driver for liquid crystal and LED displays.

It has four address inputs (D0 to D3), an active LOW latch enable input (LE), an active HIGH blanking input (BL), an active HIGH phase input (PH) and seven buffered segment outputs (Qa to Qg).

Key Features

  • Fully static operation.
  • 5 V, 10 V, and 15 V parametric ratings.
  • Standardized symmetrical output characteristics.
  • Specified from 40 C to +85 C.
  • Complies with JEDEC standard JESD 13-B 3. Ordering information Table 1. Ordering information All types operate from 40 C to +85 C Type number Package Name.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HEF4543B BCD to 7-segment latch/decoder/driver Philips
HEF4543B BCD to 7-segment latch/decoder/driver nexperia
HEF4543BT BCD to 7-segment latch/decoder/driver nexperia
HEF4541B Programmable timer nexperia
HEF4541B-Q100 Programmable timer nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
HEF4541B Programmable timer
HEF4502B Strobed hex inverter/buffer
HEF4505B 64-bit/ 1-bit per word random access read/write memory
HEF4508B Dual 4-bit latch
HEF4510B BCD up/down counter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HEF4543B BCD to 7-segment latch/decoder/driver Rev. 7 — 1 April 2016 Product data sheet 1. General description The HEF4543B is a BCD to 7-segment latch/decoder/driver for liquid crystal and LED displays. It has four address inputs (D0 to D3), an active LOW latch enable input (LE), an active HIGH blanking input (BL), an active HIGH phase input (PH) and seven buffered segment outputs (Qa to Qg). The circuit provides the function of a 4-bit storage latch and an 8-4-2-1 BCD to 7-segment decoder/driver. It can invert the logic levels of the output combination. The phase (PH), blanking (BL) and latch enable (LE) inputs are used to reverse the function table phase, blank the display and store a BCD code, respectively.