ISP1107 Datasheet | NXP Semiconductors

ription The ISP1107 is a Universal Serial Bus (USB) transceiver that is fully pliant with the Universal Serial Bus Specification Rev. 1.1. It is ideal for portable electronics devices such as mobile phones, digital still cameras and personal digital assistants. It allows 1.8 V, 2.5 V and 3.3 V USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) to interface with the physical layer of the Universal Serial Bus. It has an integrated 5 V to 3.3 V voltage regulator allowing direct powering from the USB supply VBUS. The ISP1107 can be used as a USB device transceiver or a USB host transceiver. It can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. The ISP1107 is patible with the industry-standard Philips Semiconductors USB transceiver PDIUSBP11A. 2. Features s s s s s s s s s s s s s s plies with Universal Serial Bus Specification Rev. 1.1 Integrated 5 V to 3.3 V voltage regulator allowing direct powering from USB VBUS Used as a USB device transceiver or a USB host transceiver Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates Slew-rate controlled differential data driver Differential input receiver with wide mon-mode range and very high input sensitivity Stable RCV output during SE0 condition Two single-ended receivers with hysteresis Low-power operation Three I/O voltage levels: 1.8 V, 2.5 V and 3.3 V Backward patible with PDIUSBP11A Higher than 8 k V ESD protection Full industrial operating temperature range - 40 to +85 °C Available in small TSSOP16 and BCC16 packages. c c Philips Semiconductors Advanced USB transceiver 3. Applications s Portable electronic devices, such as x mobile phones x digital still cameras x personal digital assistants (PDA) x Internet appliances (IA). 4. Ordering information Table 1: Ordering information Package Name ISP1107xx ISP1107DH [1] In development. Type number Description plastic bottom chip carrier; 16 terminals; body 3 x...