JN5189 Datasheet | NXP Semiconductors

IEEE 802.15.4 low power wireless MCU Rev. 1.1 - 22 February 2020 product data sheet 1. General description The JN5189 and JN5189T (called JN5189 throughout this document) are ultra-low power, high performance Arm® Cortex®-M4 based wireless microcontrollers supporting Zig Bee 3.0 networking stack to facilitate the development of Home Automation, Light Link and Remote control applications. The JN5189 includes a 2.4 GHz IEEE 802.15.4 pliant transceiver and a prehensive mix of analog and digital peripherals. Ultra-low current consumption in both radio receive and transmit modes and also in the power down modes allow use of coin cell batteries. The product has 640 KB embedded Flash, 152 KB RAM memory. The embedded flash can support Over The Air (OTA) code download of applications. The devices include 10-channel PWM, two timers, one RTC/alarm timer, a Windowed Watchdog Timer (WWDT), two USARTs, two SPI interfaces, two I2C interfaces, a DMIC subsystem with dual-channel PDM microphone interface with voice activity detector, one 12-bit ADC, temperature sensor and parator. The JN5189T variant has an internal NFC tag and with connections to the external NFC antenna. The JN5188 variant has the same functionality as the JN5189 except for reduced memory sizes of 320 KB embedded Flash, 88 KB RAM. The JN5188T variant has the functionality of the JN5188 with the addition of an embedded NFC tag. The Arm Cortex-M4 is a 32-bit core that offers system enhancements such as low power consumption, enhanced debug Features , and a high level support of the block integration. The Arm Cortex-M4 CPU, operates at up to 48 MHz. 2. Features and benefits 2.1 Benefits - Very low current solution for long battery life - Single chip device to run stack and application - System BOM is low in ponent count and cost - Flexible sensor interfacing - Embedded NTAG on JN5189T and JN5188T devices - Package - 6 6 mm HVQFN40, 0.5 mm pitch - Lead-free and Ro HS pliant - Junction...