Datasheet4U Logo Datasheet4U.com

LD6836 - Ultra low dropout regulators

General Description

The LD6836 series is a small-size Low DropOut regulator (LDO) family with a typical voltage drop of 90 mV at 300 mA current rating.

Operating input voltages can range from 2.3 V to 5.5 V.

The devices are available with fixed output voltages between 1.2 V and 3.6 V.

Key Features

  • 300 mA output current rating Input voltage range 2.3 V to 5.5 V Fixed output voltage between 1.2 V and 3.6 V Dropout voltage 90 mV at 300 mA output rating Low quiescent current in shutdown mode (typical 0.1 A) 30 V RMS output noise voltage (typical value) at 10 Hz to 100 kHz Turn-on time 150 s 55 dB Power Supply Rejection Ratio (PSRR) at 1 kHz Over-temperature protection Output current limiter LD6836x/xxH: high-ohmic (3-state) output state when disabled LD6836x/xxP: low-ohmic output state whe.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LD6801 LED Lighting Output Current Ripple Suppressor Leadtrend Technology
LD6805 Low-dropout regulators NXP Semiconductors
LD6806 Ultra low-dropout regulator NXP Semiconductors
LD600D3LH1 TFT LCD Sharp
LD600T3SH1 TFT LCD Sharp

Other Datasheets by NXP Semiconductors

Part Number Description
LD6836CX4 Ultra low dropout regulators
LD6836TD Ultra low dropout regulators
LD6835 Low-dropout regulator
LD6835K Low-dropout regulator
LD6915 Dual low-dropout regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LD6836 series Ultra low dropout regulators, low noise, 300 mA Rev. 2 — 5 October 2012 Product data sheet 1. Product profile 1.1 General description The LD6836 series is a small-size Low DropOut regulator (LDO) family with a typical voltage drop of 90 mV at 300 mA current rating. Operating input voltages can range from 2.3 V to 5.5 V. The devices are available with fixed output voltages between 1.2 V and 3.6 V. In disabled mode the LD6836x/xxH devices show a high-ohmic state at the output pin while the LD6836x/xxP devices contain a pull-down switching transistor to provide a low-ohmic output state (auto discharge function). The LD6836CX4 and LD6836CX4/C devices are in a 0.