Datasheet4U Logo Datasheet4U.com

LD6915 - Dual low-dropout regulators

General Description

The LD6915 series consists of small-size dual Low DropOut regulators (LDO).

Each device delivers two times 150 mA with a typical voltage drop of 120 mV at 150 mA for each LDO.

Key Features

  • Extremely low standby current in shutdown mode ( 0.1 A).
  • Low quiescent current.
  • Fast turn-on time.
  • Safety features (temperature watchdog, current limiter and foldback circuit).
  • Delayed output circuit for second LDO (optional).
  • High PSRR.
  • Auto discharge or high-ohmic mode for output when disabled.
  • DFN1212-6 (SOT1229) with 0.4 mm pitch and package size of 1.2  1.2  0.4 mm.
  • Pb-free, Restriction of Hazardous Substances (RoHS) compliant, free of halog.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LD6915 Ultra-Fast CMOS LDO Regulator Leadtrend
LD6911 Ultra-Fast CMOS LDO Regulator Leadtrend
LD6912 Ultra-Fast CMOS LDO Regulator Leadtrend
LD6914 Adjustable CMOS LDO Regulator Leadtrend
LD6918 Low-Noise CMOS Dual LDO Regulators Leadtrend

Other Datasheets by NXP Semiconductors

Part Number Description
LD6915LX Dual low-dropout regulators
LD6938 Dual low-dropout regulators
LD6938CX6 Dual low-dropout regulators
LD6835 Low-dropout regulator
LD6835K Low-dropout regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LD6915 series Dual low-dropout regulators, low noise, 150 mA Rev. 1 — 8 July 2013 Objective data sheet DFN1212-6 1. Product profile 1.1 General description The LD6915 series consists of small-size dual Low DropOut regulators (LDO). Each device delivers two times 150 mA with a typical voltage drop of 120 mV at 150 mA for each LDO. The system offers two individual fixed nominal output voltages (VO(nom)) from 1.2 V to 3.6 V with high Power Supply Rejection Ratio (PSRR) of 80 dB. The LDO has an integrated Soft start to control the inrush current during start-up. The output mode, when disabled, can be high-ohmic 3-state or auto discharge. Optionally a delayed output circuit is available for the second output.