Datasheet4U Logo Datasheet4U.com

LD6938CX6 - Dual low-dropout regulators

Download the LD6938CX6 datasheet PDF. This datasheet also covers the LD6938 variant, as both devices belong to the same dual low-dropout regulators family and are provided as variant models within a single manufacturer datasheet.

General Description

The LD6938 series consists of small-size dual Low DropOut regulators (LDO).

Each device delivers two times 300 mA with a typical voltage drop of 240 mV at full output load.

The devices offer two separate fixed nominal output voltages (VO(nom)) in the range of 1.2 V to 3.3 V.

Key Features

  • High Power Supply Rejection Ratio (PSRR).
  • Low output noise.
  • Low quiescent current.
  • Extremely low standby current ( 0.1 A).
  • Soft start circuit to limit inrush current.
  • Output current limiter with foldback circuit.
  • Overtemperature protection.
  • Delayed output circuit for second LDO (optional).
  • Auto discharge or high-ohmic mode for output when disabled.
  • WLCSP6 with 0.4 mm pitch and package size of 1.2 mm  0.8 mm  0.47 mm 1.3.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (LD6938-NXP.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LD6938 series Dual low-dropout regulators, low noise, 300 mA Rev. 1 — 11 July 2013 Objective data sheet 1. Product profile 1.1 General description The LD6938 series consists of small-size dual Low DropOut regulators (LDO). Each device delivers two times 300 mA with a typical voltage drop of 240 mV at full output load. The devices offer two separate fixed nominal output voltages (VO(nom)) in the range of 1.2 V to 3.3 V. The LDO has an integrated Soft start to control the inrush current during start-up. The output mode, when disabled, can be high-ohmic 3-state or auto discharge. Optionally a delayed start-up circuit is available for the second output. The devices are available in a 6-bump Wafer-Level Chip-Scale Package (WLCSP) with a height of 0.47 mm. 1.