LPC1102LVUK
Description
The LPC111xLV/LPC11xxLVUK is an ARM Cortex-M0-based, low-cost 32-bit MCU family, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/16-bit architectures. The LPC111xLV/LPC11xxLVUK operate at CPU frequencies of up to 50 MHz.
Key Features
- System:; ARM Cortex-M0 processor, running at frequencies of up to 50 MHz.; ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC).; Serial Wire Debug.; System tick timer.
- Memory:; Up to 32 kB on-chip flash programming memory with a 256 byte page erase function.; Up to 8 kB SRAM.; In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software.
- Digital peripherals:; Up to 27 General-Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors and a configurable open-drain mode.; GPIO pins can be used as edge and level sensitive interrupt sources.; High-current output driver on one pin.; High-current sink drivers on two I2C-bus pins in Fast-mode Plus.; Four general-purpose counter/timers with up to 7 capture inputs and 13 match outputs.; Programmable windowed WDT.
- Analog peripherals: 8-bit ADC with input multiplexing among up to 8 pins.
- Serial interfaces: Datasheet pdf - NXP Semiconductors LPC111xLV/LPC11xxLVUK 32-bit ARM Cortex-M0 microcontroller * * * *
- ; UART with fractional baud rate g
