Datasheet4U Logo Datasheet4U.com

LPC802 - 32-bit ARM Cortex-M0+ microcontroller

General Description

The LPC802 is an ARM Cortex-M0+ based, low-cost 32-bit MCU family of processors operating at CPU frequencies of up to 15 MHz.

The LPC802 supports 16 KB of flash memory and 2 KB of SRAM.

Key Features

  • System:.
  • ARM Cortex-M0+ processor (revision r0p1), running at frequencies of up to 15 MHz with single-cycle multiplier and fast single-cycle I/O port.
  • ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).
  • System tick timer.
  • AHB multilayer matrix.
  • Serial Wire Debug (SWD) with four break points and two watch points. JTAG boundary scan (BSDL) supported.
  • Memory:.
  • 16 KB on-chip EEPROM based flash programming memory.
  • Code Read Protecti.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LPC10065 choke coil inductor KOA Speer Electronics
LPC1100 Cortex-M0 based microcontrollers NXP Semiconductors
LPC1102 32-bit ARM Cortex-M0 microcontroller NXP Semiconductors
LPC12065 choke coil inductor KOA Speer Electronics
LPC1224 32-bit ARM Cortex-M0 microcontroller NXP Semiconductors

Other Datasheets by NXP Semiconductors

Part Number Description
LPC804 32-bit ARM Cortex-M0+ microcontroller
LPC810 32-bit ARM Cortex-M0+ microcontroller
LPC810M021FN8 32-bit ARM Cortex-M0+ microcontroller
LPC811 32-bit ARM Cortex-M0+ microcontroller
LPC811M001FDH16 32-bit ARM Cortex-M0+ microcontroller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LPC802 32-bit ARM Cortex-M0+ microcontroller; up to 16 KB flash and 2 KB SRAM; 12-bit ADC; Comparator; Rev. 1.8 — 25 September 2019 Product data sheet 1. General description The LPC802 is an ARM Cortex-M0+ based, low-cost 32-bit MCU family of processors operating at CPU frequencies of up to 15 MHz. The LPC802 supports 16 KB of flash memory and 2 KB of SRAM. The peripheral complement of the LPC802 includes one I2C-bus interface, up to two USARTs, one SPI interface, one multi-rate timer, self-wake-up timer, one general purpose 32-bit counter/timer, one 12-bit ADC, one analog comparator, function-configurable I/O ports through a switch matrix, and up to 17 general-purpose I/O pins. For additional documentation related to the LPC802 parts, see Section 19 “References”. 2.