Datasheet4U Logo Datasheet4U.com

MC07XS6517BEK - high-side switche

Key Features

  • Quad or penta high-side switches with high transient capability.
  • 16-bit 5.0 MHz SPI control of overcurrent profiles, channel control including PWM duty cycles, output on and off open load detections, thermal shutdown and prewarning, and fault reporting.
  • Output current monitoring with programmable synchronization signal and battery voltage feedback.
  • Limp home mode.
  • External smart power switch control.
  • Operating voltage is 7.0 V to 18 V with s.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC07XSC200 Dual High Side Switch Freescale Semiconductor
MC07XSF517 Triple 7.0 mOhm and Dual 17 mOhm High Side Switch Freescale Semiconductor
MC074 Microcouplers Micropac Industries
MC0063W06030R Thick Film Chip Resistor Multicomp
MC0063W06031100K Thick Film Chip Resistor Multicomp

Other Datasheets by NXP Semiconductors

Part Number Description
MC07XS6517DEK high-side switche
MC07XS3200 Dual high-side switch
MC08XS6421BEK high-side switch
MC08XS6421CEK high-side switch
MC08XS6421DEK high-side switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NXP Semiconductors Data sheet: Technical Data 17 mOhm and 7.0 mOhm high-side switches The 12XS6 is the latest SMARTMOS achievement in automotive lighting drivers. It belongs to an expanding family, which helps to control and diagnose incandescent lamps and light-emitting diodes (LEDs), with enhanced precision. It combines flexibility through daisy chainable SPI 5.0 MHz, extended digital and analog feedbacks, safety, and robustness. Output edge shaping helps to improve electromagnetic performance. To avoid shutting off the device upon inrush current, while still being able to closely track the load current, a dynamic overcurrent threshold profile is featured. Current of each channel can be sensed with a programmable sensing ratio.