Datasheet4U Logo Datasheet4U.com

MC34972 - Multiple Switch Detection Interface

General Description

of each pin can be found in the Functional Pin Description section beginning on page 9.

Table 1.

Key Features

  • a 22-to-1 analog multiplexer for reading inputs as analog. The analog input signal is buffered and provided on the AMUX output pin for the MCU to read. The 34972 device has two modes of operation, Normal and Sleep. Normal mode allows programming of the device and supplies switch contacts with pull-up or pull-down current as it monitors switch change of state. The Sleep mode provides low quiescent current, which makes the 34972 ideal for industrial products requiring low sleep-state currents. Thi.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC34901 High-speed CAN Transceiver Freescale Semiconductor
MC34903CP3EK System Basis Chip - SBC Freescale Semiconductor
MC34903CP3EKR2 System Basis Chip - SBC Freescale Semiconductor
MC34903CP5EK System Basis Chip - SBC Freescale Semiconductor
MC34903CP5EKR2 System Basis Chip - SBC Freescale Semiconductor

Other Datasheets by NXP Semiconductors

Part Number Description
MC34931 5.0A H-Bridge
MC34932 Dual 5.0A H-Bridge
MC34933 1.4A Dual H-Bridge Driver
MC34673 High Input Voltage 1.2A Charger
MC34709 PMIC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Freescale Semiconductor Technical Data Document Number: MC34972 Rev. 1.0, 9/2013 Multiple Switch Detection Interface with Suppressed Wake-up 34972 The 34972 Multiple Switch Detection Interface with suppressed wake-up is designed to detect the closing and opening of up to 22 switch contacts. The switch status, either open or closed, is transferred to the microprocessor unit (MCU) through a serial peripheral interface (SPI). The device also features a 22-to-1 analog multiplexer for reading inputs as analog. The analog input signal is buffered and provided on the AMUX output pin for the MCU to read. The 34972 device has two modes of operation, Normal and Sleep.