MK22FN512VFX12 Datasheet | NXP Semiconductors

NXP Semiconductors Data Sheet: Technical Data K22P121M120SF7 Rev. 8 06/2023 Kinetis K22F 512KB Flash 120 MHz Arm® Cortex®-M4 Based Microcontroller with FPU The Kinetis K22 product family members are optimized for costsensitive applications requiring low-power, USB connectivity, and processing efficiency and high peripheral integration with a floating point unit. These devices share the prehensive enablement and scalability of the Kinetis family. This product offers: - Run power consumption down to 156 µA/MHz and static power consumption down to 3.8 µA, full state retention and 6 µS wakeup. Lowest static mode down to 140 n A. - USB LS/FS OTG 2.0 with embedded 3.3 V, 120 m A LDO voltage regulator. USB FS device crystal-less functionality. MK22FN512VDC12 MK22FN512VLL12 MK22FN512VLH12 MK22FN512VMP12 MK22FN512VFX12 121 XFBGA (DC) 8 x 8 x 0.5 mm P .65 100 & 64 LQFP(LL&LH) 14x14x1.4 mm P .5(LL) 10x10x1.4 mm P .5(LH) 64 MAPBGA (MP) 88 QFN (FX) 5 x 5 x 1.2 mm P .5 10 x 10 x 0.9 mm P .4 Performance - 120 MHz Arm Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz Memories and memory interfaces - 512 KB of embedded flash and 128 KB of RAM - Flex Bus external bus interface 1 - Serial programming interface (Ez Port) - Preprogrammed Kinetis flashloader for one-time, insystem factory programming Timers - Two 8-ch general purpose/PWM timers - Two 2-ch general purpose timers with quadrature decoder functionality - Periodic interrupt timers - 16-bit low-power timer - Real-time clock with independent power domain - Programmable delay block Security and integrity modules - Hardware CRC module - 128-bit unique identification (ID) number per chip - Hardware random-number generator - Flash access control to protect proprietary software Operating Characteristics - Voltage range (including flash writes): 1.71 to 3.6 V - Temperature range (ambient): -40 to 105°C Analog modules - Two 16-bit SAR ADCs (1.2 MS/s in 12bit mode) - Two 12-bit DACs 2 - Two analog...