MKE02Z64VQH2 Datasheet | NXP Semiconductors

features - Operating characteristics - Voltage range: 2.7 to 5.5 V - Flash write voltage range: 2.7 to 5.5 V - Temperature range (ambient): -40 to 105°C - Performance - Up to 20 MHz Arm® Cortex-M0+ core - Single cycle 32-bit x 32-bit multiplier - Single cycle I/O access port - Memories and memory interfaces - Up to 64 KB flash - Up to 256 B EEPROM - Up to 4 KB RAM - Clocks - Oscillator (OSC) - supports 32.768 k Hz crystal or 4 MHz to 20 MHz crystal or ceramic resonator; choice of low power or high gain oscillators - Internal clock source (ICS) - internal FLL with internal or external reference, 31.25 k Hz pretrimmed internal reference for 16 MHz system clock (able to be trimmed for up to 20 MHz system clock) - Internal 1 k Hz low-power oscillator (LPO) MKE02P64M20SF0 - System peripherals - Power management module (PMC) with three power modes: Run, Wait, Stop - Low-voltage detection (LVD) with reset or interrupt, selectable trip points - Watchdog with independent clock source (WDOG) - Programmable cyclic redundancy check module (CRC) - Serial wire debug interface (SWD) - Bit manipulation engine (BME) - Security and integrity modules - 64-bit unique identification (ID) number per chip - Human-machine interface - Up to 57 general-purpose input/output (GPIO) - Two up to 8-bit keyboard interrupt modules (KBI) - External interrupt (IRQ) - Analog modules - One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC) - Two analog parators containing a 6-bit DAC and programmable reference input (ACMP) - Timers - One 6-channel Flex Timer/PWM (FTM) - Two 2-channel Flex Timer/PWM (FTM) - One 2-channel periodic interrupt timer...