MKS20FN128VLH12 Datasheet | NXP Semiconductors

NXP Semiconductors Data Sheet: Technical Data KS22P100M120SF0 Rev. 3.1, 06/2022 KS22/KS20 Microcontroller 120 MHz ARM® Cortex®-M4, with up to 256 KB Flash The KS2x product family is built on the ARM® Cortex®-M4 processor with lower power and higher memory densities in multiple packages. This device offers 120 MHz performance with an integrated single-precision floating point unit (FPU). Embedded flash memory sizes range from 128 KB to 256KB. This device also includes: - USB FS OTG 2.0 with crystal-less functionality - Flex CAN, supporting CAN protocol according to the ISO 11898-1 standard and CAN 2.0 B protocol specifications - Flex IO, a highly configurable module providing a wide range of protocols including, but not limited to UART, LPI2C, SPI, I2S, and PWM/Waveform generation. MKS22FN256Vxx12 MKS22FN128Vxx12 MKS20FN256Vxx12 MKS20FN128Vxx12 100 & 64 LQFP (LL & LH) 48 QFN (FT) 14×14×1.7 mm Pitch 7×7×0.65 mm Pitch 0.5 0.5 mm; 10×10×1.6 mm mm Pitch 0.5 mm Performance Analog modules - 120 MHz ARM Cortex-M4 core with DSP instructions - One 16-bit ADC module with up to 17 single-end delivering 1.25 Dhrystone MIPS per MHz channels and 4 differential channels, and up to 1.2 Memories and memory interfaces Msps at ≤ 13-bit mode - One 12-bit DAC module - Up to 256 KB of embedded flash and 64 KB of SRAM - One analog parator (CMP) module - Preprogrammed Kinetis Flashloader for one-time, in- system factory programming munication interfaces System peripherals - Flexible low-power modes, multiple wake up sources - 16-channel asynchronous DMA controller - Independent external and software watchdog monitor - USB FS/LS OTG 2.0 with on-chip transceiver - One Flex IO module - Three UART modules (one supporting ISO7816, and the other two operating up to 1.5 Mbit/s) - One LPUART module supporting asynchronous Clocks - Two crystal oscillators: 32 k Hz (RTC), and 32-40 k Hz or 3-32 MHz - Three internal oscillators: 32 k Hz, 4 MHz, and 48 MHz - Multi-purpose clock...