Datasheet4U Logo Datasheet4U.com

MPC17510 - 1.2A 15V H-Bridge motor driver

General Description

of each pin can be found in the Functional Pin Description section beginning on page 9.

Table 2.

15, 16 5, 17 NC OUT2 PGND 8, 21 6, 18 VM 9

Key Features

  • 2.0 V to 15 V continuous operation.
  • Output current 1.2 A (DC), 3.8 A (peak).
  • 450 mΩ RDS(on) H-Bridge MOSFETs.
  • 5.0 V TTL-/CMOS-compatible inputs.
  • PWM frequencies up to 200 kHz.
  • Undervoltage shutdown.
  • Cross-conduction suppression Document Number: MPC17510 Rev. 6.0, 7/2016 17510 H-BRIDGE MOTOR DRIVER EJ Suffix (Pb-Free) 98ASH70455A 24-LEAD TSSOP EJ Suffix (Pb-Free) 98ASA00887D 20-pin TSSOP with exposed pad 5.0 V 15 V 17510 VDD VM C.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MPC17517 1.0 A 6.8 V Dual Motor Driver Freescale Semiconductor
MPC1710A Smart MOS H-Bridge Motor Control Motorola Semiconductor
MPC17A34RVMEL 4-Ch H-Bridge Motor Driver ETC
MPC17C724 0.4A Dual H-Bridge Motor Driver Freescale Semiconductor
MPC100 Wide Bandwidth 4 x 1 VIDEO MULTIPLEXER Burr-Brown

Other Datasheets by NXP Semiconductors

Part Number Description
MPC17511 H-Bridge Motor Driver
MPC17511A H-Bridge Motor Driver
MPC17529 dual H-Bridge motor driver
MPC17531A dual H-Bridge motor driver
MPC17533 Dual H-Bridge Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NXP Semiconductors Technical Data 1.2 A 15 V H-Bridge motor driver IC The 17510 is a monolithic H-Bridge designed to be used in portable electronic applications such as digital and SLR cameras to control small DC motors. The 17510 can operate efficiently with supply voltages as low as 2.0 V to as high as 15 V. Its low RDS(on) H-Bridge output MOSFETs (0.45 Ω typical) can provide continuous motor drive currents of 1.2 A and handle peak currents up to 3.8 A. It is easily interfaced to low-cost MCUs via parallel 5.0 V compatible logic. The device can be pulse width modulated (PWMed) at up to 200 kHz.