Datasheet4U Logo Datasheet4U.com

NT3H1201 - Energy harvesting NFC Forum Type 2 Tag

Download the NT3H1201 datasheet PDF (NT3H1101 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for energy harvesting nfc forum type 2 tag.

Description

NTAG I2C - The entry to the NFC world: simple and lowest cost.

The NTAG I2C is the first product of NXP’s NTAG family offering both contactless and contact interfaces (see Figure 1).

Features

  • 2.1 Key features.
  • RF interface NFC Forum Type 2 Tag compliant.
  • I2C interface.
  • Configurable field detection pin based on open drain implementation that can be triggered upon the following events:.
  • RF field presence.
  • First start of communication.
  • Selection of the tag only.
  • 64 byte SRAM buffer for fast transfer of data (Pass-through mode) between the RF and the I2C interfaces located outside the User Memory.
  • Wake up signal at the field detect pin when:.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (NT3H1101-NXP.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

  • NT3225S - Temperature Compensated Crystal Oscillators (Nihon Dempa Kogyo)
  • NT3225SA - Temperature Compensated Crystal Oscillators (Nihon Dempa Kogyo)
  • NT331 - NPN silicon transistor (AUK)
  • NT332 - PNP silicon transistor (AUK)
  • NT353 - NPN Silicon Transistor (AUK)
  • NT354 - PNP Silicon Transistor (AUK)
  • NT35410 - One-chip Driver IC with internal GRAM (Novatek)
  • NT35510 - One-chip Driver IC with internal GRAM (Novatek)
  • NT35512 - One-chip Driver IC without internal GRAM (Novatek)
  • NT35532 - One-chip RAM-less Driver (Novatek)
Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
NT3H1101/NT3H1201 NTAG I2C - Energy harvesting NFC Forum Type 2 Tag with field detection pin and I2C interface Rev. 3.3 — 15 July 2015 265433 Product data sheet COMPANY PUBLIC 1. General description NTAG I2C - The entry to the NFC world: simple and lowest cost. The NTAG I2C is the first product of NXP’s NTAG family offering both contactless and contact interfaces (see Figure 1). In addition to the passive NFC Forum compliant contactless interface, the IC features an I2C contact interface, which can communicate with a microcontroller if the NTAG I2C is powered from an external power supply. An additional externally powered SRAM mapped into the memory allows a fast data transfer between the RF and I2C interfaces and vice versa, without the write cycle limitations of the EEPROM memory.
Published: |