Datasheet4U Logo Datasheet4U.com

NTS0304E - 4-bit dual supply translating transceiver

General Description

The NTS0304E is a 4-bit, dual supply translating transceiver family with auto direction sensing, that enables bidirectional voltage level translation.

Key Features

  • Wide supply voltage range:.
  • VCC(A): 0.95 V to 3.6 V and VCC(B): 1.65 V to 5.5 V.
  • No power-sequencing required.
  • Maximum data rate.
  • Open-drain: 2 Mbps.
  • Push-pull: 20 Mbps.
  • Longer one-shot pulse for driving larger capacitive loads with much reduced ringing and overshoot.
  • A-side and OE inputs accept voltages up to 3.6 V and are 3.6 V tolerant.
  • B-side inputs accept voltages up to 5.5 V and are 5.5 V tolerant.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NTS0104 Dual supply translating transceiver NXP Semiconductors
NTS-3000 Network Time Synchronisation USER MANUAL ELPROMA
NTS10100EMFS Very Low Leakage Trench-based Schottky Rectifier ON Semiconductor
NTS10100EMFST1G Very Low Leakage Trench-based Schottky Rectifier ON Semiconductor
NTS10100EMFST3G Very Low Leakage Trench-based Schottky Rectifier ON Semiconductor

Other Datasheets by NXP Semiconductors

Part Number Description
NTS0302 2-bit dual supply translating transceiver
NTS0308E 8-bit dual supply translating transceiver
NTS0101 Dual supply translating transceiver
NTS0102 Dual supply translating transceiver
NTS0102-Q100 Dual supply translating transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NTS0304E 4-bit dual supply translating transceiver; open drain; auto direction sensing Rev. 1.3 — 9 October 2023 Product data sheet 1 General description The NTS0304E is a 4-bit, dual supply translating transceiver family with auto direction sensing, that enables bidirectional voltage level translation. It features eight 1-bit input-output ports (A and B), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 0.95 V and 3.6 V. VCC(B) can be supplied at any voltage between 1.65 V and 5.5 V. This flexibility makes the device suitable for translating between any of the voltage nodes (0.95 V, 1.2 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins A and OE are referenced to VCC(A) and pin B is referenced to VCC(B).