Datasheet4U Logo Datasheet4U.com

NX18P3001 - Bidirectional high-side power switch

Description

The NX18P3001 is an advanced bidirectional power switch and ESD- protection device for combined USB-OTG and charger port applications.

Features

  • 30 V tolerant VBUSI supply pin.
  • Wide supply voltage range from 3.2 V to 17.5 V.
  • Automatic switch operation for charging within the supply range.
  • ISW maximum 3 A continuous current.
  • Low ON resistance: 62 mī— (typical) at a supply voltage of 5.0 V.
  • 1.8 V control logic input to open the switch.
  • Soft start turn-on slew rate.
  • Protection circuitry.
  • Overtemperature protection.
  • Overvoltage lockout.
  • Undervoltage lockout.
  • ESD protection:.
  • HB.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NX1029X N/P-channel MOSFET nexperia
NX1029X MOSFET NXP Semiconductors
NX1030 SWITCHES Bulgin
NX11M22A Single-Chip 32-bit MCU NYQUEST
NX11M23A Single-Chip 32-bit MCU NYQUEST

Other Datasheets by NXP Semiconductors

Part Number Description
NX1117C Low-dropout linear regulators
NX1117C12Z Low-dropout linear regulators
NX1117C15Z Low-dropout linear regulators
NX1117C18Z Low-dropout linear regulators
NX1117C19Z Low-dropout linear regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NX18P3001 Bidirectional high-side power switch for charger and USB-OTG combined applications Rev. 1 — 24 September 2013 Product data sheet 1. General description The NX18P3001 is an advanced bidirectional power switch and ESD- protection device for combined USB-OTG and charger port applications. It includes undervoltage lockout, overvoltage lockout and overtemperature protection circuits designed to automatically isolate the power switch terminals when a fault condition occurs. The device features two power switch input/output terminals (VBUSI and VBUSO), an open-drain acknowledge output (ACK), an enable input which includes logic level translation (EN) and low capacitance Transient Voltage Suppression (TVS) type ESD clamps for USB data and ID pins.
Published: |