Datasheet4U Logo Datasheet4U.com

NX20P5090 - High voltage USB PD power switch

Description

The NX20P5090 is an advanced 5 A unidirectional power switch for USB PD.

It includes under voltage lockout, over voltage lockout, reverse current protection and over-temperature protection circuits.

It is designed to automatically isolate the power switch terminals when a fault condition occurs.

Features

  • Wide supply voltage range from 2.5 V to 20 V.
  • ISW maximum 5 A continuous current.
  • 29 V tolerance on both VBUS and VINT pin.
  • 30 mī— (typical) Low ON resistance.
  • Adjustable VBUS over voltage protection.
  • Built in slew rate control for inrush current limit.
  • All time two level reverse-current protection.
  • Protection circuitry.
  • Over-Temperature Protection.
  • Over-Voltage Protection.
  • Under-Voltage Lockout.
  • Reverse Current Protection.
  • Surge p.

📥 Download Datasheet

Datasheet preview – NX20P5090

Datasheet Details

Part number NX20P5090
Manufacturer NXP
File Size 1.05 MB
Description High voltage USB PD power switch
Datasheet download datasheet NX20P5090 Datasheet
Additional preview pages of the NX20P5090 datasheet.

📁 Similar Datasheet

  • NX2016SF - Crystal Units (NDK)
  • NX2113 - 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER (Microsemi)
  • NX2113A - 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER (Microsemi)
  • NX2114 - 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER (Microsemi)
  • NX2114 - 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER (NEXSEM)
  • NX2114A - 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER (Microsemi)
  • NX2114A - 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER (NEXSEM)
  • NX2120 - SYNCHRONOUS PWM CONTROLLER (NEXSEM)
  • NX2124 - 300kHz SYNCHRONOUS PWM CONTROLLER (Microsemi)
  • NX2124A - 300kHz SYNCHRONOUS PWM CONTROLLER (Microsemi)
Other Datasheets by NXP
  • NX20P0407 - CC and SBU Protection
  • NX20P0408 - USB D+/D- protection
  • NX20P0477 - USB Type-C CC smart protection
  • NX20P3483UK - high voltage sink/source combo switch
  • NX2020N2 - N-channel Trench MOSFET
  • NX2020P1 - single P-channel Trench MOSFET
  • NX2A4WP - A4WP compliant high frequency wireless charging receiver front end

Full PDF Text Transcription

Click to expand full text
NX20P5090 High voltage USB PD power switch Rev. 1 — 14 October 2016 Product data sheet 1. General description The NX20P5090 is an advanced 5 A unidirectional power switch for USB PD. It includes under voltage lockout, over voltage lockout, reverse current protection and over-temperature protection circuits. It is designed to automatically isolate the power switch terminals when a fault condition occurs. Both VBUS and VINT pins have 29 V tolerance in shutdown mode. Two NX20P5090 chips can be used in parallel to support dual power inputs connecting to the same charging circuit. The device has a default 23 V over voltage protection threshold, and the OVP threshold can be adjusted by using an external resistor divider on OVLO pin.
Published: |