Datasheet4U Logo Datasheet4U.com

NX3L4357 - Dual Low-ohmic Single-pole Single-throw Analog Switch

General Description

The NX3L4357 is a low-ohmic single-pole triple-throw analog switch suitable for use as an analog or digital 3:1 multiplexer/demultiplexer.

It has two digital select inputs (S0 and S1), one digital enable input (E), three independent inputs/outputs (Y0, Y1 and Y2) and a common input/output (Z).

Key Features

  • Wide supply voltage range from 1.4 V to 4.3 V.
  • Very low ON resistance (peak):.
  • 1.65  (typical) at VCC = 1.4 V.
  • 0.95  (typical) at VCC = 1.65 V.
  • 0.55  (typical) at VCC = 2.3 V.
  • 0.50  (typical) at VCC = 2.7 V.
  • 0.50  (typical) at VCC = 4.3 V.
  • Break-before-make switching.
  • High noise immunity.
  • ESD protection:.
  • HBM JESD22-A114F Class 3A exceeds 7500 V.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM AEC-Q100-011 revision B exceeds 1000 V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NX3L4051 Single low-ohmic 8-channel analog switch NXP Semiconductors
NX3L1G3157 Low-ohmic single-pole double-throw analog switch NXP Semiconductors
NX3L1G66 Low-voltage analog switch NXP Semiconductors
NX3L1T3157 Low-ohmic single-pole double-throw analog switch NXP Semiconductors
NX3L1T5157 Low-ohmic single-pole double-throw switch NXP Semiconductors

Other Datasheets by NXP Semiconductors

Part Number Description
NX3L4053 Triple low-ohmic single-pole double-throw analog switch
NX3L4053-Q100 Triple low-ohmic single-pole double-throw analog switch
NX3L4684 Low-ohmic Dual Single-pole Double-throw Analog Switch
NX3L1G3157-Q100 Low-ohmic single-pole double-throw analog switch
NX3L1G384 Low-ohmic single-pole single-throw analog switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NX3L4357 Low-ohmic single-pole triple-throw analog switch with enable input Rev. 5 — 18 June 2012 Product data sheet 1. General description The NX3L4357 is a low-ohmic single-pole triple-throw analog switch suitable for use as an analog or digital 3:1 multiplexer/demultiplexer. It has two digital select inputs (S0 and S1), one digital enable input (E), three independent inputs/outputs (Y0, Y1 and Y2) and a common input/output (Z). The device features a broadcast mode, when S0 and S1 are both high the signal applied to pin Z is passed to Y0, Y1 and Y2. Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.