Datasheet4U Logo Datasheet4U.com

NX3V1T384 - Low-ohmic Single-pole Single-throw Analog Switch

Description

The NX3V1T384 is a low-ohmic single-pole single-throw analog switch.

It has two input/output terminals (Y and Z) and an active LOW enable input pin (E).

When E is HIGH, the analog switch is turned off.

Features

  • Wide supply voltage range from 1.4 V to 4.3 V.
  • Very low ON resistance (peak):.
  • 0.8  (typical) at VCC = 1.4 V.
  • 0.5  (typical) at VCC = 1.65 V.
  • 0.3  (typical) at VCC = 2.3 V.
  • 0.25  (typical) at VCC = 2.7 V.
  • 0.25  (typical) at VCC = 4.3 V.
  • High noise immunity.
  • ESD protection:.
  • HBM JESD22-A114F Class 3A exceeds 7500 V.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM AEC-Q100-011 revision B exceeds 1000 V.
  • IEC61000-4-2 contact discharge excee.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NX3V1T66 Low-voltage analog switch NXP Semiconductors
NX3V1G384 Low-ohmic single-pole single-throw analog switch NXP Semiconductors
NX3V1G66 Low-voltage analog switch NXP Semiconductors
NX3008CBKS N/P-channel MOSFET nexperia
NX3008CBKS MOSFET NXP Semiconductors

Other Datasheets by NXP Semiconductors

Part Number Description
NX3008NBK MOSFET
NX3020NAK single N-channel Trench MOSFET
NX3020NAKS MOSFET
NX3020NAKV dual N-channel Trench MOSFET
NX3DV42 Dual high-speed USB 2.0 double-pole double-throw analog switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NX3V1T384 Low-ohmic single-pole single-throw analog switch Rev. 3 — 4 November 2011 Product data sheet 1. General description The NX3V1T384 is a low-ohmic single-pole single-throw analog switch. It has two input/output terminals (Y and Z) and an active LOW enable input pin (E). When E is HIGH, the analog switch is turned off. Schmitt trigger action at the enable input (E) makes the circuit tolerant to slower input rise and fall times. A low input voltage threshold allows pin E to be driven by lower level logic signals without a significant increase in supply current ICC. This makes it possible for the NX3V1T384 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation.
Published: |