Datasheet4U Logo Datasheet4U.com

NX5P1000 - Logic controlled high-side power switch

General Description

The NX5P1000 is an advanced power switch and ESD- protection device for USB OTG applications.

The device includes under voltage and over voltage lockout, over-current, over-temperature, reverse bias and in-rush current protection circuits.

Key Features

  • Wide supply voltage range from 3 V to 5.5 V.
  • 30 V tolerant on VBUS.
  • ISW maximum 1 A continuous current.
  • Very low ON resistance: 100 m (maximum) at a supply voltage of 4.0 V.
  • Low-power mode (ground current 20 A typical).
  • 1.8 V control logic.
  • Soft start turn-on slew rate.
  • Protection circuitry.
  • Over-temperature protection.
  • Over-current protection with low current output mode.
  • Reverse bias current/Back drive protection.
  • Overvoltage locko.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NX5008NBKM N-channel Trench MOSFET nexperia
NX5020UNBK 50V N-channel Trench MOSFET nexperia
NX5020UNBKW 50V N-channel Trench MOSFET nexperia
NX5032SA Crystal Units ETC
NX5032SD Crystal Units ETC

Other Datasheets by NXP Semiconductors

Part Number Description
NX5P1100 Logic controlled high-side power switch
NX5P2090 Logic controlled high-side power switch
NX5P2190 Logic controlled high-side power switch
NX5P2553 Precision adjustable current-limited power switch
NX5P2924 Logic controlled high-side power switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NX5P1000 Logic controlled high-side power switch Rev. 2 — 14 January 2014 Product data sheet 1. General description The NX5P1000 is an advanced power switch and ESD- protection device for USB OTG applications. The device includes under voltage and over voltage lockout, over-current, over-temperature, reverse bias and in-rush current protection circuits. These circuits are designed to isolate a VBUS OTG voltage source automatically from a VBUS interface pin when a fault condition occurs. The device features two power switch terminals, one input (VINT) and one output (VBUS). It has a current limit input (ILIM) for defining the over-current and in-rush current limit. A voltage detect output (VDET) is used to determine when VINT is in the correct voltage range.