NXP Semiconductors P-80C31
The Philips 8XC51/31 is a high-performance static 80C51 design fabricated with Philips high-density CMOS technology with operation from 2.7V to 5.5V. The 8XC51/31 contains a 4k × 8 ROM, a 128 × 8 RAM, 32 I/O lines, three 16-bit counter/timers, a six-source, four-priority level nested interrupt structure, a serial I/O port for either multi-processor communications, I/O expansion or full duplex UART, and on-chip oscillator and clock circuits.| Part No. | P-80C31 |
|---|---|
| Datasheet | P-80C31 Download |
| Manufacturer |  NXP Semiconductors |
| Description | P80C31 |
| Buy | Stock & Price |
DESCRIPTION
In addition, the device is a low power static design which offers a wide range of operating frequencies down to zero. Two software selectable modes of power reduction—idle mode and power-down mode are available. The idle mode freezes the CPU while allowing the RAM, timers, serial port, and interrupt system to continue functioning. The power-down mode saves the RAM contents but freezes the oscillator, causing all other chip functions to be inoperative. Since the design is static, the clock can be stopped without loss of user data and then the execution resumed from the point the clock was stopped.FEATURES
● 8051 Central Processing Unit – 4k × 8 ROM (80C51) – 128 × 8 RAM – Three 16-bit counter/timers – Boolean processor – Full static operation – Low voltage (2.7V to 5.5V@ 16MHz) operation● Memory addressing capability – 64k ROM and 64k RAM
● Power control modes: – Clock can be stopped and resumed – Idle mode – Power-down mode
● CMOS and TTL compatible
● TWO speed ranges at...
