NXP Semiconductors P3S0200
The P3S0200 is ideally suited for the switching of high-speed I3C signals in communication and server applications, such as servers, workstations, and notebooks that have limited I3C I/Os. The wide bandwidth (52 MHz) of this switch allows signal to pass with minimum edge and phase distortion. The device multiplexes differential outputs from the I3C controller to one of two corresponding targets with hardware select pin.| Part No. | P3S0200 |
|---|---|
| Datasheet | P3S0200 Download |
| Manufacturer |  NXP Semiconductors |
| Description | I3C switch |
| Buy | Stock & Price |
FEATURES AND BENEFITS
● Wide supply voltage range from 2.3 V to 3.6 V● Switch voltage accepts signals up to 5.5 V
● 1.8 V control logic at VCC = 3.6 V
● Low-power mode when OE is HIGH (2 μA maximum)
● 6 Ω (maximum) ON resistance
● 0.1 Ω (typical) ON resistance mismatch between channels
● 6 pF (typical) ON-state capacitance
● High bandwidth (52 MHz typical)
● Latch-up performance exceeds 100 mA per JESD 78B Class II Level A
● ESD protection: – HBM JESD22-A114F Class 3A exceeds 8000 V – CDM JESD22-C101E exceeds 1000 V – HBM exceeds 12000 V for I/O to GND protection
● Specified from -40 °C to +85 °C 3
APPLICATIONS
● I3C or I2C 2:1 or 1:2 mux with hardware select pin allowing bus voltage up to 5.5 V 4 Ordering information Table 1. Ordering information Type number Topside marking [1] Package Name P3S0200GM x00 XQFN10DESCRIPTION
plastic extremely thin quad flat package; no leads; 10 terminals; body 2 × 1.55 × 0.5 mm [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
