NXP Semiconductors P3T2030GUK
The P3T1035xUK/P3T2030xUK is a temperature-to-digital converter from -40 °C to +125 °C range. It uses an on-chip band gap temperature sensor and A-to-D conversion technique with an overtemperature detection. The device contains a number of data registers: Configuration (Conf) stores the device settings such as device operation mode, and temperature register (Temp) stores the digital temp reading, which communicates by a controller via the 2-wire serial I3C/I2C-bus interface.| Part No. | P3T2030GUK |
|---|---|
| Datasheet | P3T2030GUK Download |
| Manufacturer |  NXP Semiconductors |
| Description | digital temperature sensor |
| Buy | Stock & Price |
FEATURES AND BENEFITS
● I3C and I2C interface● Supply range: 1.4 V to 1.98 V
● Eight different device addresses (A through H) are available
● Programmable undertemperature and overtemperature registers
● Resolution: 12 bits (0.0625 °C); supports 8-bit reading
● Accuracy: P3T1035xUK – 1.62 V ≤ VCC ≤ 1.98 V – ±0.5 °C (maximum) from 0 °C to +70 °C – ±1 °C (maximum) from -40 °C to +125 °C – 1.4 V ≤ VCC < 1.62 V – ±2 °C (maximum) from -20 °C to +100 °C – ±3 °C (maximum) from -40 °C to +125 °C
● Accuracy: P3T2030xUK – 1.62 V ≤ VCC ≤ 1.98 V – ±2 °C (maximum) from -40 °C to +125 °C – 1.4 V ≤ VCC < 1.62 V – ±2 °C (maximum) from -20 °C to +100 °C – ±3 °C (maximum) from -40 °C to +125 °C
● Low quiescent current: 6 μA supply current (typical).
● Package: wafer level chip-scale package, 4 terminals, 0.4 mm pitch, 0.91 mm x 0.855 mm x 0.455 mm body P3T1035XUK_P3T2030XUK Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 1.2 — 15 July 2024 © 2024 NXP B.V.
