PCA9540B Datasheet PDF - NXP 2-channel I2C-bus multiplexer Specs

PCA9540B - 2-channel I2C-bus multiplexer

Datasheet Summary

Description

The PCA9540B is a 1-of-2 bidirectional translating multiplexer, controlled via the I2C-bus.

The SCL/SDA upstream pair fans out to two SCx/SDx downstream pairs, or channels.

Only one SCx/SDx channel is selected at a time, determined by the contents of the programmable control register.

Features

1-of-2 bidirectional translating multiplexer.
I2C-bus interface logic; compatible with SMBus standards.
Channel selection via I2C-bus.
Power-up with all multiplexer channels deselected.
Low Ron switches.
Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and 5 V buses.
No glitch on power-up.
Supports hot insertion.
Low standby current.
Operating power supply voltage range of 2.3 V to 5.5 V.
5 V tolerant inputs.
0 Hz to 400 kH.

Datasheet Details

Part number	PCA9540B
Manufacturer	NXP
File Size	346.64 KB
Description	2-channel I2C-bus multiplexer
Datasheet	PCA9540B Datasheet
Additional preview pages of the PCA9540B datasheet.

📁 Similar Datasheet

PCA9541 - 2-to-1 I2C-bus master selector (NXP Semiconductors)

PCA9541A - 2-to-1 I2C-bus master selector (NXP Semiconductors)

PCA9542A - 2-channel I2C-bus multiplexer and interrupt logic (NXP Semiconductors)

PCA9543A - 2-Channel I2C Bus Switch (Texas Instruments)

PCA9543A - 2-channel I2C-bus switch (NXP Semiconductors)

PCA9543B - 2-channel I2C-bus switch (NXP Semiconductors)

PCA9543C - 2-channel I2C-bus switch (NXP Semiconductors)

PCA9544A - Low Voltage 4-Channel I2C and SMBus Multiplexer (Texas Instruments)

PCA9545A - Low Voltage 4-channel I2C and SMbus Switch (Texas Instruments)

PCA9546A - Low Voltage 4-Channel I2C and SMBus Switch (Texas Instruments)

Full PDF Text Transcription

Click to expand full text

PCA9540B 2-channel I2C-bus multiplexer Rev. 7.1 — 19 January 2018 Product data sheet 1. General description The PCA9540B is a 1-of-2 bidirectional translating multiplexer, controlled via the I2C-bus. The SCL/SDA upstream pair fans out to two SCx/SDx downstream pairs, or channels. Only one SCx/SDx channel is selected at a time, determined by the contents of the programmable control register. A power-on reset function puts the registers in their default state and initializes the I2C-bus state machine with no channels selected. The pass gates of the multiplexer are constructed such that the VDD pin can be used to limit the maximum high voltage that is passed by the PCA9540B. This allows the use of different bus voltages on each SCx/SDx pair, so that 1.8 V, 2.5 V or 3.

Published: Mar 22, 2005 |