Datasheet4U Logo Datasheet4U.com

PCA9955A - 16-channel Fm+ I2C-bus 57 mA/20 V constant current LED driver

General Description

The PCA9955A is an I2C-bus controlled 16-channel constant current LED driver optimized for dimming and blinking 57 mA Red/Green/Blue/Amber (RGBA) LEDs in amusement products.

Key Features

  • 16 LED drivers. Each output programmable at:.
  • Off.
  • On.
  • Programmable LED brightness.
  • Programmable group dimming/blinking mixed with individual LED brightness.
  • Programmable LED output delay to reduce EMI and surge currents.
  • Gradation control for all channels.
  • Each channel can assign to one of four gradation control groups.
  • Programmable gradation time and rate for ramp-up and/or ramp-down operations.
  • Programmable step time (6-bit) from 0.5 ms (mini.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PCA9306 SMBus Voltage-Level Translator Texas Instruments
PCA9306 Dual bidirectional I2C-bus and SMBus voltage-level translator NXP Semiconductors
PCA9306 Dual Bidirectional I2C-bus and SMBus Voltage-Level Translator ON Semiconductor
PCA9306-Q1 SMBus Voltage-Level Translator Texas Instruments
PCA9502 8-bit I/O expander NXP Semiconductors

Other Datasheets by NXP Semiconductors

Part Number Description
PCA9955 16-channel constant current LED driver
PCA9955-Q900 16-channel constant current LED driver
PCA9955Q900 16-channel constant current LED driver
PCA9952 16-channel constant current LED driver
PCA9952-Q900 16-channel constant current LED driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PCA9955A 16-channel Fm+ I2C-bus 57 mA/20 V constant current LED driver Rev. 3 — 14 October 2014 Product data sheet 1. General description The PCA9955A is an I2C-bus controlled 16-channel constant current LED driver optimized for dimming and blinking 57 mA Red/Green/Blue/Amber (RGBA) LEDs in amusement products. Each LED output has its own 8-bit resolution (256 steps) fixed frequency individual PWM controller that operates at 31.25 kHz with a duty cycle that is adjustable from 0 % to 100 % to allow the LED to be set to a specific brightness value. An additional 8-bit resolution (256 steps) group PWM controller has both a fixed frequency of 122 Hz and an adjustable frequency between 15 Hz to once every 16.8 seconds with a duty cycle that is adjustable from 0 % to 99.