PCD50922
PCD50922 is Low cost; low power DECT baseband controllers ABC-PRO manufactured by NXP Semiconductors.
INTEGRATED CIRCUITS
DATA SHEET
PCD509x2/zuu/v family Low cost; low power DECT baseband controllers (ABC-PRO)
Objective specification File under Integrated Circuits, IC17 1998 Apr 27
Philips Semiconductors
Objective specification
Low cost; low power DECT baseband controllers (ABC-PRO)
CONTENTS 1 2 3 4 5 5.1 5.2 6 6.1 7 8 8.1 8.2 8.3 8.4 9 10 11 Features
GENERAL DESCRIPTION ORDERING INFORMATION BLOCK DIAGRAM PINNING INFORMATION Pinning Pin description FUNCTIONAL DESCRIPTION DECT baseband controller system PACKAGE OUTLINES SOLDERING Introduction Reflow soldering Wave soldering Repairing soldered joints DEFINITIONS LIFE SUPPORT APPLICATIONS PURCHASE OF PHILIPS I2C PONENTS
PCD509x2/zuu/v family
1998 Apr 27
Philips Semiconductors
Objective specification
Low cost; low power DECT baseband controllers (ABC-PRO)
1 Features
PCD509x2/zuu/v family
- The PCD50912 is designed for GAP patible DECT handsets
- The PCD50922 is designed for GAP patible DECT base stations serving up to six handsets
- Fully static 80C51 microcontroller
- Emulation supported for 80C51 program development
- Four 8-bit ports (P0, P1, P2 and P3), 32 I/O lines
- Dedicated port pins for keyboard, I2C-bus, interrupt sources and/or external memory
- Fifteen interrupt sources (including those from TICB, BML and DSP) with two priority levels
- I2C-bus interface
- UART with Ir DA-patible Data Transmission Mode
- 256 bytes of microcontroller main RAM
- 3 kbytes of microcontroller AUX RAM
- 1 kbyte of shared System Data RAM
- 64 kbytes of mask programmable ROM
- 128 kbyte address space for external ROM access, maximum 192 kbytes together with internal...
