PN5190B1 Datasheet | NXP Semiconductors

NFC frontend Rev. 3.10 - 25 July 2024 Product data sheet 1 General description This document describes the functionality and electrical specification of the high-power NFC-IC PN5190B1, silicon version B1, using firmware or V2.0 or higher. Additional documents supporting a design-in of the PN5190B1 are available from NXP, this additional design-in information is not part of this document. The PN5190B1 supports highly innovative and unique Features which do not require any host controller interaction. These Features include dynamic power control (DPC), adaptive waveform control (AWC), and fully automatic EMD error handling. The independence of real-time host controller interactions makes this product a good fit for systems which operate a pre-emptive multitasking OS like Linux or Android. In this document, the term „MIFARE card“ refers to a contactless card using an IC out of the MIFARE Classic, MIFARE Plus, MIFARE Ultralight or MIFARE DESFire product family. NXP Semiconductors NFC frontend 2 Features and benefits 2.1 RF functionality - As a highly integrated high performance full NFC Forum-pliant frontend IC for contactless munication at 13.56 MHz, this NFC frontend IC utilizes an outstanding modulation and demodulation concept pletely integrated for relevant 13.56 MHz based contactless munication methods and protocols. PN5190B1 supports munication with all products of the MIFARE product-based card family including MIFARE Ultralight, MIFARE Classic 1K/4K, MIFARE DESFire EV1/EV2 and MIFARE Plus cards CRYPTO implemented in hardware for R/W of all NXP MIFARE product-based cards (includes intellectual-property licensing rights for NXP ISO/IEC 14443-A, Innovatron ISO/IEC 14443-B, and NXP MIFARE products). The PN5190B1 frontend IC supports the following RF operating modes: 2.1.1 ISO/IEC14443-A - Reader/writer mode supporting ISO/IEC 14443-A R/W up to 848 kbit/s 2.1.2 ISO/IEC14443-B - Reader/writer mode supporting ISO/IEC 14443-B...